Brake Press Operator

Traylor Bros., Inc.

Brake Press Operator

Patchogue, NY
Full Time
Paid
  • Responsibilities

    Onyett is seeking an experienced Brake Press Operator responsible for forming various types of steel for bucket and blade liners, forming metal into different degrees, and forming channels. These responsibilities include shaping metal, maintaining press brake, reading blueprints, completing inspections, packaging, lifting, and moving of parts & inventory, using a forklift, and following safety regulations.

    Key Tasks & Responsibilities

    • Select proper tooling and dies based on material thickness and type.

    • Set up tooling, load programs and set machine parameters to ensure optimal performance of the equipment.

    • Reads and interprets blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished workpiece, sequence of operations, and setup requirements.

    • Measures, marks, and scribes’ dimensions and reference points on material or work-piece as guides for subsequent forming as necessary.

    • Calculates and sets controls to regulate forming factors.

    • Starts and observes machine operation to detect malfunctions or out-of-tolerance forming and adjusts machine controls or control media as required.

    • Verifies conformance of finished workpiece to specifications, using measuring and inspection tools as necessary.

    • Sets up and operates machine on trial run to verify accuracy of machine settings or programmed control data.

    • Performs routine maintenance tasks on machines as required.

    • Ensure that safe work practices are followed and adhered to.

    • Comply with safety regulations and maintain clean and orderly work areas.

    The above statements are intended to describe the general nature and level of work performed by people assigned to this classification. They are not intended to be a complete list of all responsibilities, duties and skills required of personnel so classified. Duties and responsibilities may be added or changed as deemed appropriate by management at any time.

    Required Skills

    Skills and Abilities

    • Strong work tenure: 3+ years of experience.
    • Ability to read and take blueprints, required material, and execute work.
    • Ability to perform all job duties.
    • Read tape measurements.
    • Apply shop mathematics to solve problems.
    • Compare and see differences in size, shape and form of lines, figures, and objects.
    • Detail- and deadline-oriented multitasker.
    • Work within precise limits or standards of accuracy.

    Physical Demands

    • Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA, and other federals, state, and local standards, including meeting qualitative and/or quantitative productivity standards.
    • Ability to maintain regular, punctual attendance
    • Must be able to lift and carry up to 50 lbs.
    • Must be able to work outside with various weather conditions

    Who we are:

    Established in 1999, Onyett Fabricators is a dedicated shop providing fabrication and field services, welding,
    and other structural metalwork for the coal, aggregate, and construction industries.

    Onyett has 34,000 square feet of shop space and operates 24/7 to meet our clients’ needs.

    SERVICES

    • Line Boring, Shop and Field
    • All Size Bucket Repairs
    • Structural Steel Fabrication
    • Dozer Repairs and Liners
    • Ripper Repairs and New Machined AR400 Rippers
    • Barge and Pontoon Fabrication
    • Hard Facing and Tungsten Carbiding Capabilities
    • Multiple Machining Capabilities
    • Drill Stem Repairs and Manufacture
    • New Stock Plate in Mild Steel, AR400, Nickel Chrome and Chromium Clad Overlay

    AREAS OF WORK

    • Coal Mines
    • Power Plants (Gas, Coal)
    • Cement Plants
    • Aggregate (Rock and Sand)
    • Farming
    • Construction (Dirt and Asphalt)
    • Dredging
    • Tunneling and Boring Companies

    PORTABLE FIELD SERVICE

    20 Trucks Equipped with:

    • Cranes
    • Welding Equipment
    • Air Arcs
    • Air Compressors
    • Line Boring Equipment

    MACHINE SHOP

    34,000 sq ft, 24/7 Work Hours

    Overhead Cranes
    Five (5) 5-ton Cranes
    Two (2) 2-ton Cranes

    Cutting Table
    Plasma CNC Cutting to 2 in
    Torch CNC Cutting to 6 in

    Blast and Paint Capabilities
    2,100 sq ft Paint Bay

    Presses
    450-ton Press
    1,000-ton Press up to 20 ft Long

    Toshiba/Shibaura CNC
    Horizontal Boring Mill
    5 Axis Table, 118 in Cross Travel
    x 95 in Height Travel
    25,000 lb Capacity

    Haas Vertical Machining Center
    4 Axis Table, 50 in x 25 in Travel
    16 Position Tool Changer

    Toshiba CNC Vertical Lathe
    59 in x 70 in Table with 59 in Height
    17,600 lb Capacity

    Viper VT-50 CNC Lathe
    25 in Double Chucks
    9.25 in Spindle Bore
    34 in Turning Capacity x 40 in Swing

    Cincinnati Milacron Avenger 250S Lathe
    10.39 Diameter x 16.42 Length
    Sub Spindle 65 in

    Poreba Hollow Spindle Lathe
    Double Chucks
    Swing 47 in x 120 in Center to Center Chucks


    Onyett Fabricators Benefits

    • Competitive pay
    • Optimal health, vision, and dental care insurance programs with very low premiums
    • PTO
    • Personal development opportunities
    • 401K with generous Matching
    • Family-like company culture

    Onyett Fabricators is an Equal Opportunity Employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, veteran status, sex, sexual orientation, gender identity, age, genetic information, pregnancy, disability, protected activity, or other non-merit factors

    Required Experience

  • Qualifications

    Skills and Abilities

    • Strong work tenure: 3+ years of experience.
    • Ability to read and take blueprints, required material, and execute work.
    • Ability to perform all job duties.
    • Read tape measurements.
    • Apply shop mathematics to solve problems.
    • Compare and see differences in size, shape and form of lines, figures, and objects.
    • Detail- and deadline-oriented multitasker.
    • Work within precise limits or standards of accuracy.

    Physical Demands

    • Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA, and other federals, state, and local standards, including meeting qualitative and/or quantitative productivity standards.
    • Ability to maintain regular, punctual attendance
    • Must be able to lift and carry up to 50 lbs.
    • Must be able to work outside with various weather conditions

    Who we are:

    Established in 1999, Onyett Fabricators is a dedicated shop providing fabrication and field services, welding,
    and other structural metalwork for the coal, aggregate, and construction industries.

    Onyett has 34,000 square feet of shop space and operates 24/7 to meet our clients’ needs.

    SERVICES

    • Line Boring, Shop and Field
    • All Size Bucket Repairs
    • Structural Steel Fabrication
    • Dozer Repairs and Liners
    • Ripper Repairs and New Machined AR400 Rippers
    • Barge and Pontoon Fabrication
    • Hard Facing and Tungsten Carbiding Capabilities
    • Multiple Machining Capabilities
    • Drill Stem Repairs and Manufacture
    • New Stock Plate in Mild Steel, AR400, Nickel Chrome and Chromium Clad Overlay

    AREAS OF WORK

    • Coal Mines
    • Power Plants (Gas, Coal)
    • Cement Plants
    • Aggregate (Rock and Sand)
    • Farming
    • Construction (Dirt and Asphalt)
    • Dredging
    • Tunneling and Boring Companies

    PORTABLE FIELD SERVICE

    20 Trucks Equipped with:

    • Cranes
    • Welding Equipment
    • Air Arcs
    • Air Compressors
    • Line Boring Equipment

    MACHINE SHOP

    34,000 sq ft, 24/7 Work Hours

    Overhead Cranes
    Five (5) 5-ton Cranes
    Two (2) 2-ton Cranes

    Cutting Table
    Plasma CNC Cutting to 2 in
    Torch CNC Cutting to 6 in

    Blast and Paint Capabilities
    2,100 sq ft Paint Bay

    Presses
    450-ton Press
    1,000-ton Press up to 20 ft Long

    Toshiba/Shibaura CNC
    Horizontal Boring Mill
    5 Axis Table, 118 in Cross Travel
    x 95 in Height Travel
    25,000 lb Capacity

    Haas Vertical Machining Center
    4 Axis Table, 50 in x 25 in Travel
    16 Position Tool Changer

    Toshiba CNC Vertical Lathe
    59 in x 70 in Table with 59 in Height
    17,600 lb Capacity

    Viper VT-50 CNC Lathe
    25 in Double Chucks
    9.25 in Spindle Bore
    34 in Turning Capacity x 40 in Swing

    Cincinnati Milacron Avenger 250S Lathe
    10.39 Diameter x 16.42 Length
    Sub Spindle 65 in

    Poreba Hollow Spindle Lathe
    Double Chucks
    Swing 47 in x 120 in Center to Center Chucks


    Onyett Fabricators Benefits

    • Competitive pay
    • Optimal health, vision, and dental care insurance programs with very low premiums
    • PTO
    • Personal development opportunities
    • 401K with generous Matching
    • Family-like company culture

    Onyett Fabricators is an Equal Opportunity Employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, veteran status, sex, sexual orientation, gender identity, age, genetic information, pregnancy, disability, protected activity, or other non-merit factors