Job Description

ProSidian Seeks a Construction Discipline Engineer (CDE) Pipe/Mechanical - Engineering (CO102) Engagement Team | *** - Labor Hour Subcontract located Savannah River Site / Aiken, South Carolina supporting a liquid waste contractor (Savannah River Remediation [SRMC]) at the Savannah River Site in Aiken, SC, which is owned by the U.S. Department of Energy.

Seeking Construction Discipline Engineer (CDE) Pipe/Mechanical candidates CO102. This as a Labor Hour Subcontract or Contract W-2 (IRS-1099) Position and ProSidian reserves the right to convert to a Full-Time ProSidian employed W-2 Position.

JOB OVERVIEW

Provide services and support as a Construction Discipline Engineer (CDE) Pipe/Mechanical (CO102) at Savannah River Site / Aiken, South Carolina

RESPONSIBILITIES AND DUTIES - Construction Discipline Engineer (CDE) Pipe/Mechanical - Engineering (CO102)

Position Description:

Field Engineer is responsible for planning and technical oversight of field construction activities within a specified discipline associated with procurement, fabrication, installation, modification and maintenance of systems and components. Coordinates with Design agencies to ensure timely issuance of new design or design changes. Walk down and review designs for constructability, resolve design problems encountered in the field during construction and meets with and discusses solutions with Design Engineers. Inspects / verifies materials, equipment, and construction workmanship and assures compliance with drawings, specifications and code requirements. Coordinates with Quality Control to ensure the installation meets the requirements. Participates in turnover activities. Supports / participates in start-up and functional check out of equipment and systems.

Position requires a thorough understanding of Construction Engineering principles and ability to apply these principles to field conditions. Experience in the preparation of computer-based construction work execution plans (work Packages) including job specific hazards analysis, i.e. Asset Suite and Assisted Hazard Analysis or equivalent

Qualifications

Desired Qualifications For Construction Discipline Engineer (CDE) Pipe/Mechanical - Engineering (CO102) ( CO102 ) Candidates:

• Minimum Qualifications: Bachelor's degree in **(specified discipline) engineering and at least 5 years of practical experience in construction **(specified discipline) field engineering or
• Associate's degree in (specified discipline) engineering and 5-10 years of practical experience in construction **(specified discipline) engineering or
• High school diploma and 10+ years of practical experience in construction **(specified discipline) engineering
• Working knowledge of discipline specific codes and standards
• Previous experience with generating work execution plans (preferably utilizing the Asset Suite work control system)
• Previous experience with generating job hazards analysis
• Previous experience performing material take off and procurement

**Specific Discipline = (Mechanical, Piping, Electrical, Civil, Instruments and Controls) as determined by requestor

Education / Experience Requirements / Qualifications

Position Responsibilities:

Design output constructability reviews

• Review design output and vendor documents
• Field walk down with design engineers
• Verify design constructability including procedure and code compliance
• Verify field conditions vs. Design output
• Verify material availability
• Submit constructability comments
• Track comments to resolution
• Support project team design review meetings

Field material take-off & procurement support

• Develop / expedite bill of materials (BOM)
• Track the progress / status of material delivery
• Coordinate delivery of material to the field
• Verification of received material vs. Ordered material

Work execution plan development

• Walk downs with craft supervision & support groups
• Develop installation sequence
• Generate work instructions
• Generate inspection and test records or coordinate with quality control
• Understand layout / survey needs and generate layout / survey requests
• Generate hazards analysis for field execution of construction scope
• Support/lead team hazard analysis review meeting.
• Generate or support the generation of job specific permits as required
• Lockout/tagout order
• Power services utilization permit
• Hot work
• Asbestos disturbance
• Confined space
• Radiological
• Excavation
• Hazardous waste

Work Execution Plan Review & Approval

• Attend / chair execution plan review meetings
• Develop routing for list for hazards analysis approval
• Develop routing list for work plan approval
• Coordinate and expedite work package approval routing
• Disposition comments to the work execution plan
• Assemble approved work execution plan
• Provide status & update of work execution plan in the SRS work control passport system

Work Execution Field Coverage & Support

• Lead pre-job briefings with craft workers
• Perform task ready walk down with craft supervision
• Verify quantities of installed commodities
• Coordinate daily field support
• Expedite / order material as required
• Coordinate material testing
• Coordinate and status shop fabrication in support of field execution
• Perform field inspections
• Identify and coordinate resolution of field installation issues

Work Execution Plan Closure

• Generate design completion notices
• Ensure accuracy of work execution plan status
• Close all required permits
• Close work execution plan documentation

Skills Required

The position requires the following specific requirements:

• Experienced with pipe / tubing fabrication and installation
• Experienced with pipe support fabrication and installation
• Experienced with pipe testing, hydrostatic and pneumatic
• Familiar with National Codes ASME Piping codes B31.1 and B31.3
• Capable of interpreting design drawings, P&ID’s and Orthographics
• Knowledge of SRS specific piping guides and standards is a plus
• Familiar with National Codes and Standards (ASME relative to Tank fabrication/installation, rotating and stationary Equipment, H&V, Insulation, etc.) and capable of interpreting and analyzing requirements to ensure compliance
• Experienced in H&V fabrication / installation / testing
• Experienced in setting of equipment, pumps and alignments
• Knowledge of SRS specific mechanical guides and standards is a plus
• Experience in developing ordinary and critical lift plans is a plus
• Experienced in radiological work planning and hazard analysis is desirable
• Capable of climbing and spending extended periods of time in the field
• Capable of obtaining qualification to work in radiological work areas

Competencies Required

Ancillary Details Of The Roles

Work hours:

A 40-hour workweek is scheduled. SRR construction utilizes a 10 hour per day - four days per week schedule. A standard work week is Monday through Thursday 6:30am - 5:00pm. However, alternate schedules could be employed. Workweek excludes SRR holidays.

Security:

• Candidate must be a U.S. citizen.
• Candidates must posses a valid driver's license
• Personal vehicles operated by candidate must have valid registration
• Personal vehicles operated by candidate must be insured with proof of insurance within the vehicle

Other Details

#TechnicalCrossCuttingJobs #EnergyTechnology #Jugaad #SavannahRiver #EnvironmentalManagement #PokaYoke #ProjectControls

Additional Information

ProSidian Consulting is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, or Vietnam era, or other eligible veteran status, or any other protected factor. All your information will be kept confidential according to EEO guidelines.

ProSidian Consulting has made a pledge to the Hiring Our Heroes Program of the U.S. Chamber of Commerce Foundation and the “I Hire Military” Initiative of The North Carolina Military Business Center (NCMBC) for the State of North Carolina. All applicants are encouraged to apply regardless of Veteran Status.

Furthermore, we believe in "HONOR ABOVE ALL" - be successful while doing things with the right way. The pride comes out of the challenge; the reward is excellence in the work.

FOR EASY APPLICATION USE OUR CAREER SITE LOCATED ON http://www.ProSidian.com/ - ONLY CANDIDATES WITH REQUIRED CRITERIA ARE CONSIDERED. OR SEND YOUR RESUME’S, BIOS, AND SALARY EXPECTATIONS RATES, VIA CAREERS @ PROSIDIAN.COM. Be sure to place the job reference code in the subject line of your email. Be sure to include your name, address, telephone number, total compensation package, employment history, and educational credentials.

Risk Management | Compliance | Business Processes | IT Effectiveness | Engineering | Environmental | Sustainability | Human Capital