We will be accepting applications for this job opening only between the opening and closing dates. Individuals who meet all of the requirements will be considered for an interview. Job applications may be filled out in person or online at www.alaskancopper.com.

Job Title: Non-Destructive Testing Assistant

Pay Rate: $32/hr - $40/hr (Depending on Experience)

Hours of Work: Day shift 7:00 am to 3:30 pm

Location: 3200 6th Ave S, Seattle, WA 98134

Job Scope:

Be able to perform radiographic (x-ray) inspection without supervision and report to the Alaskan Copper Works NDT Technical Lead.

Job Summary:

Radiographically inspect welds in pipe and fittings of various corrosion resistant alloys that are manufactured at Alaskan Copper Works.

Required Essential Job Skills/Experience:

1. Preferably will have experience as an ASNT SNT-TC-1A Level II in Radiography to allow prompt certification by Alaskan Copper Works NDT Written Practice.
2. Must have sufficient reading, oral, written communication and computer skills. .

Required Essential Job Functions/Duties:

1. Set up and perform radiographic inspection in accordance with Alaskan Copper Works procedures.
2. Interpret and evaluate x-ray film of welds in accordance with job specifications.
3. Generate Alaskan Copper Radiography Reports.

Desirable Job Skills/Experience:

Must have experience as an ASNT SNT-TC-1A Level II individual in Radiography.

_
Job Accommodations:_

Considered on an individual basis.

Physical Requirements:

1. This position requires the following in an 8-hour work day:

Total At One Time (Hours) Total During Entire 8-Hour Day

Standing: 1 hour Up to 8 hours

Walking: 30 minutes Up to 8 hours

Sitting: 30 minutes Up to 8 hours

2. Movement of objects and strength required for this job:

Lifting: Carrying:

Up to 5 lbs.: CONTINUOUSLY (67-100%) FREQUENTLY (67-100%)

6-10 lbs.: FREQUENTLY (34-66%) FREQUENTLY (34-66%)

11-20 lbs.: FREQUENTLY (34-66%) FREQUENTLY (34-66%)

21-25 lbs.: FREQUENTLY (34-66%) FREQUENTLY (34-66%)

26-50 lbs.: FREQUENTLY (34-66%) FREQUENTLY (34-66%)

51-100 lbs.: OCCASIONALLY (1-33%) OCCASIONALLY (1-33%)

3. Required repetitive use of hands:

Simply Grasping: YES Fine Manipulating: YES

Pushing & Pulling: YES

4. Repetitive actions/movements involving the feet:

Right Foot: NO Both: NO

Left Foot: NO

5. Worker Positions Required in the Performance of this Job:

Climbing: OCCASIONALLY (1-33%) Stooping: FREQUENTLY (34-66%)

Balancing: OCCASIONALLY (1-33%) Kneeling: OCCASIONALLY (1-33%)

Bending: FREQUENTLY (34-66%) Crouching: OCCASIONALLY (1-33%)

Reaching: FREQUENTLY (34-66%) Crawling: OCCASIONALLY (1-33%)

Climbing: Depending upon the work and job being performed, a worker may climb step ladders to do maintenance work.

6. Sensory Requirements:

Talking and/or Hearing: YES

Writing: YES

Seeing: Field of Vision: YES

Depth Perception: YES

Accommodation: YES

Color Vision: YES

• Color Vision: Must be able to differentiate between typically red, green and black control buttons on machinery.

7. Environmental Conditions That Are Found in the Work Site:

PHYSICAL SURROUNDINGS: X Inside (40% of time)

_ Outside (60% of time)

TEMPERATURE: X Cold (enough to cause bodily discomfort)

X Hot (enough to cause bodily discomfort)

_ Variations (sufficient to cause bodily reactions)

WET: X Contact with water and/or other liquids

HUMID: _ Moisture content sufficient to cause bodily discomfort

NOISE: X Sufficient to require hearing

protection

VIBRATION: _ Sufficient to cause repeated motion or continuous shock

HAZARDS: X Risk of bodily injury present

FUMES: X Smoke or vapors resulting from combustion or chemical reaction

ODORS: _ Toxic or non-toxic smells

TOXIC CONDITIONS: X Exposure to disabling fumes, dusts, gases, vapors, mists or liquids that may cause bodily harm.

DUST: X Small particulates that may cause occupational disease

POOR VENTILATION: _ Exposure to drafts or insufficient movement of air