1st shift (Monday – Thursday 6am – 4:30pm)
To make Sheet Metal weldments, a Fitter/Welder will work either alone or as part of a small team.
The dimensions parameters of the mechanical engineering drawings must be met by the weldments. A Fitter/Welder must decide where each weld is to be conducted based on the drawing and meet the size and length criteria of each weld provided within the tolerance allowed.
Any cosmetic or visual standards of the weldment must also be performed by a Fitter/Welder. This may necessitate the grinding of welds and the polishing of sheet metal.
Responsibilities
• Ability to MIG weld mild steel
• Ability to MIG weld stainless steel
• Ability to perform basic fitting
• Ability to adjust machine according to department manual(s)
• Ability to remove material using grinding process
• Ability to read drawings and inspect parts for basic dimensions
• Ability to perform basic layouts (positioning and alignment)
• Ability to inspect parts against complex engineered drawings
• Ability to spray transfer MIG weld
• Capability to examine weld bead for acceptable attributes
• Ability to identify types of copper, stainless grades, etc.
• Knowledge of flux core, shielded wire
• Ability to cope and fit
Relationships
• Reporting to department Supervisor
• Internal relationships include regular interaction with: Machine Operators, Welders, Painters, Material Handlers, Leadpersons, Supervisors
• External relationships include regular interaction with: N/A
Responsibilities, Skills, Experience, and Requirements
• Successful candidate will typically have 1-2 years of relevant work experience
• Must have a basic command of the English language, both written and verbal
• Ability to execute hot work (any work performed outside of department)
• Ability to finish grind, surface finishing based on departmental requirements
• Ability to repair improper welds
• Knowledge of fixtures required for area of responsibility
• Ability to tack weld
• Ability to stud weld
• Ability to fine tune voltage
• Ability to square parts
• Ability to torch cut
• Ability to arc metal gouge
• Basic product knowledge (understanding of how work ties into the larger picture) based on departmental need/requirement
• Knowledge of AWS chart/steel tables
• Knowledge of welding symbols
• Knowledge of and ability to use basic tools (tape measure squares, clamps, fillet gage, angle finder, etc.)
• Ability to convert decimals to fractions and utilize conversion chart
• Awareness and adherence to Lock Out Tag Out procedures
• Ability to follow company operating procedures, safety rules and ISO requirements
You should be proficient in:
Machines & technologies you'll use:
Salary info:
$20 - $22 / hr